Moneris smartselect, Operating Manual

Page: 87 / 198

SmartSELECT Merchant Operating Manual v 2.0 77
Chapter 11: On-Screen Calculator
The SmartSELECT has an on-screen calculator that can perform basic math func-
tions and has a memory function as well as the ability to paste values into the
amount field in a transaction.
The calculator performs the following functions:
• add
• subtract
• multiply
• divide
The following buttons are changed on the calculator:
• the
Delete
button becomes the
CE
(Clear Entry) button
• the
Enter
button becomes the
=
button.
• the
Menu
button becomes the
#/$
button
11.1:Accessing the Calculator
The calculator is accessible from (i.e., the
Calculator
button is available only on)
the
Enter Transaction Amount
screen for Debit/Credit transactions. It is not avail-
able for Gift Card and Loyalty program transactions.
Note: The calculator is available even while the terminal is logged off.
There are two calculator modes. These are accessed on calculator screen by press-
ing the button in the top-right corner of the calculator screen. The button toggles
between the two modes:
•
Number mode:
Press the
#
on the calculator screen. The numbers in the text
box appear with a decimal point only if the decimal point button (.) is pressed
•
Dollar mode:
Press the
$
on the calculator screen. The numbers in the text
box automatically appear with a two-place decimal point and the dollar sym-
bol to the left of the number.
Note: You cannot switch between modes during a single calculation.
Once you use the
Trans from Calc
button on the
Enter Transaction Amount
screen, you cannot access the calculator again until you begin another financial
transaction. (However, the value will remain in the calculator even after the finan-
cial transaction is complete.)