Moneris smartselect, Operating Manual

Page: 163 / 198

SmartSELECT Merchant Operating Manual v 2.0 153
AIR MILES Reward Program
I.1.3: Incentive Value and Dates
If the Incentive value is greater than zero, the rewards program awards additional
rewards points to a cardholder according to the Incentive value.
Note: The Incentive Value MUST be greater than 1.00 in order to enable
application of the Incentive value.
The Incentive Value is multiplied by the Total Rewards (calculated using the Cal-
culator and Factor values described in section
I.1.2: Calculator and Factor Val-
ues ) to determine the Total Incentive Rewards.
The Incentive Value will only be applied during the period identified by the Incen-
tive Start Date and Incentive End Date.
E
xample 4:
Based on purchase and reward amounts from Example 2.
I.1.4: Sale Item Values
Specific items can receive additional AIR MILES Rewards points if they are
defined as Sale Items in the Rewards configuration. Up to 20 items can be
defined.
Note: You will need to keep a list of which item numbers you have defined and
to which items they apply.
E
xample 5:
Note: Based on the purchase and reward amounts from Example 2.
PARAMETERS PURCHASE REWARDS
INCENTIVE
VALUE REWARDS
VALUES
$438.55 115 1.5 172
CALCULATIONS
115 x 1.5
DESCRIPTION
The cardholder received 115 points based on their $438.55 purchase.
Then, the Incentive Value of 1.5 is applied to the Rewards Total to give the
cardholder an Incentive Rewards Total of 172 rewards points.
PARAMETERS PURCHASE REWARDS
SALE ITEM 1
REWARDS COUNT TOTAL
TOTAL
REWARDS
VALUES
$438.55 115 12 3 36 151
CALCULATION
12 x 3 115 + 36
DESCRIPTION
The cardholder received 115 points based on their $438.55 purchase.
Then, because the cardholder purchased 3 of an item defined as Sale Item 1, which
was assigned a value of 12 points, the Sale Item 1 Rewards value (12 points) is mul-
tiplied by the Count of Sale Item 1 (3 items) for a total of 36 additional points and a
final rewards total of 151 rewards points.