SCRIBE
602/612
PRINTERS
Quick Reference Guide
0011299
S C R I B E 6 1 2 P R I N T E R
HOW TO REPLACE PAPER ROLL
1
. Unlock paper compartment cover by pushing
cover back from closed position (as indicated
by arrow) and lift cover to open (cover opens
on its rear hinge). If installing paper for first
time, go to step 4.
2.
Cut or tear off any remaining part of existing
paper roll. Remove spindle from inside of
paper roll and set aside. Discard used roll.
3
. Press “Feed/Copy” button to feed any
remaining paper through printer mechanism
and discard.
DO NOT pull paper through.
4
. Unfasten end of new paper roll and tightly
fold over one corner on end to form a sharp
point (as shown in the picture at right).
5
. Insert spindle into new paper roll and place
roll and spindle into paper roll compartment
with paper feeding from bottom.
6
. Pull up lever on left side of print mechanism
and insert pointed end of paper roll into slot
at front of paper compartment until paper
appears through tear bar. Pull folded portion
of paper through until it clears tear bar.
7.
Lower lever on side of print mechanism and
press “Feed/Copy” button to advance paper
through until about two inches of paper are
showing; tear off excess paper using tear bar.
8.
Close paper compartment cover pushing
cover in reverse direction of arrows until
locking tabs on sides click into locked
position.
9.
Perform a Printer Test (61+ENTER), if desired.
Push the paper compartment
cover in the direction
indicated by the arrow
to unlock it.
Control panel.
Paper
compartment
cover.
Power switch.
Tear bar.
Feed paper roll
end through this
slot (as indicated
by arrows).
Locking tabs
for paper
compartment
cover.
Paper
compartment
cover.
Lift up lever
on left side
of print
mechanism.
Fold paper end
602
612
Your VISA Merchant Number is
Your MasterCard Merchant Number is
