Moneris Go®: Setting up Your Terminal
7
Review common settings
5.
Tap
Go
to begin configuring your Moneris Go application.
Note
: If you make any changes to these settings, those changes will be
reflected on your other Moneris Go terminals. The settings for all of your
Moneris Go terminals will be kept in sync.
6.
Review the Receipt settings screen and choose an action:
To accept the settings shown and move to the next screen, tap
Next
.
You will be able to change the settings later.
To change the settings, tap each toggle or field:
Customer receipt format
. When “Cardholder choice” is enabled,
you can enable or disable the receipt options available to your
customers. If Cardholder choice is disabled, the application will
automatically print the customer receipt.
Print delay
. This setting determines the delay (in seconds) between
printing the customer receipt and printing the merchant receipt.
Number of merchant receipts
. By default, the terminal will not print
a merchant receipt. If you want a receipt for each transaction, tap
the field and select a new value (1 or 2 receipts).
When finished, tap
Next
.
