Moneris Mobile 8100 Operating Manual Download Page 14 | Manualshive

Page: 14 / 86

background image

About Your Terminal

8

Moneris Mobile 8100 Merchant Operating Manual v1.01

2.1.7: RF Modem

The terminal is equipped with a 1xRTT modem for exchanging data over a 1xRTT
wireless network.

2.1.8: Battery Pack

The

Mobile 8100

is powered by a removable Ni-MH (Nickel Metal-Hydride)

battery. The battery pack is accessed from the bottom of the terminal.

Note:

Call the Moneris Help Desk to purchase additional batteries.

Under normal conditions of use:

•

after a full charge the terminal is expected to provide 50 or more transactions
before a recharge is required.

•

the full charge time is 16 hours

Under exceptional conditions of use:

•

the terminal has a “reserve” capacity that can be used in the event that more
transactions are needed after the battery needs recharging (i.e. the printer
begins slowing down).

Note:

The print time for a transaction processed using “reserve” capacity
will be significantly longer.

•

After extended use of the “reserve” capacity, the terminal will require addi-
tional charge time

•

If the terminal has been inactive a number of weeks it may require another 16-
hour initial charge.

Battery Voltage Status

When the battery voltage:

•

is becoming low, the printer slows down

•

becomes low, the “battery low” sign is displayed

•

becomes very low, the “battery low” sign flashes and the terminal double-
beeps

Tips for Conserving Battery Voltage

•

Configure the Power Off Time (see section

5.1: Terminal Configuration -

) to set the amount of time that the terminal will remain idle before

automatically powering off (while powered by the battery) in order to con-
serve battery power.

Note:

The terminal will not power off when it is on the charging base.

•

If you know you will not be using the terminal for a period of time longer than
the power-off time, use ADMIN 00 to turn the terminal off and conserve bat-
tery power.

«
...
12
13
14
15
16
...
»

Summary of Contents for Mobile 8100























































































Reviews:

No comments

Related manuals for Mobile 8100

Brand: TableSafe Pages: 23

Brand: NetPay Pages: 25

Brand: LAKS Pages: 24

Brand: Hobex Pages: 32

Brand: Datavan Pages: 2

Brand: Omron Pages: 8

Brand: weintek Pages: 2

Brand: 3nStar Pages: 12

Brand: POSIFLEX Pages: 20

Brand: CRS Pages: 51

Brand: Datecs Pages: 25

Brand: EBN Pages: 35

Brand: MALUX Pages: 4

Brand: ZKTeco Pages: 19

Profi Wi-Fi 3.0

Brand: Omnicom Pages: 48

Brand: Huawei Pages: 30

SmartAX MA5800-X2

Brand: Huawei Pages: 17

Brand: Facit Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands