Moneris Core® Semi-Integrated: Setting up Your Integration
2
Before getting started
Before setting up your Moneris terminal for semi-integration, you must do the following:
Set up your terminal’s hardware and software.
For wireless terminals: Disable cellular communication, enable Wi-Fi, and set up a Wi-Fi connection.
When using an IP network, ensure that your terminal always uses the same IP address in order to
maintain a connection to your POS. You can accomplish this in 2 ways. Choose one:
o
Configure the network setup on your Moneris terminal to use static IP addressing. At the Main
menu, tap
Settings
,
Communication
, and
Communications setup
, then follow the prompts. For
help, find your terminal in the list below and refer to the
Setting up your Software
guide. That
guide provides instructions for setting up a static IP network connection.
o
Continue to use dynamic IP addressing, which is the default on your Moneris terminal, but
configure your router to always assign the same IP address to the terminal. Contact your
network team / IT department for assistance if needed.
Ensure you can process transactions in order to verify your terminal is connected to your own network
and to the Moneris Host.
Consult the guides below for assistance:
V400m wireless terminal
These guides are available at
moneris.com/en/support/devices/v400m :
Moneris Core V400m Setting up Your Hardware
Moneris Core V400m Set up Your Software
Moneris Core V400m Using your terminal
V400c countertop terminal
These guides are available at
moneris.com/en/Support/Devices/V400c :
Moneris Core V400c Setting up Your Hardware
Moneris Core V400c Set up Your Software
Moneris Core V400c Using your terminal
Move/5000 wireless terminal
These guides are available at
moneris.com/en/Support/Devices/Move-5000:
Moneris Core Move/5000 Setting up Your Hardware
Moneris Core Move/5000 Set up Your Software
Moneris Core Move/5000 Using your terminal
Desk/5000 countertop terminal
These guides are available at
moneris.com/en/Support/Devices/Desk-5000:
Moneris Core Desk/5000 Setting up Your Hardware
Moneris Core Desk/5000 Set up Your Software
Moneris Core Desk/5000 Using your terminal