Mondolfo Ferro Aquila Alliance, Operator'S Manual

Page: 100 / 352

100
AQUILA ALLIANCE
User Manual
AVOID PERSONAL INJURY
It is forbidden pairs or uses centring and clamping accessories other than those speci-
fied in the “tables for using centring and clamping accessories according to rim type”
When working with “easily deformable” rims (i.e. a
central hole with thin, projecting edges - see Fig.
14) we recommend using the universal turntable for
blind rims (see the section “TABLE FOR USING CEN-
TRING AND CLAMPING ACCESSORIES ACCORDING
TO RIM TYPE” on this manual).
The TPMS device (optional accessory) can be used to check the proper operation of
pressure sensor.
NOTICE
Remove any old balancing weights from the rim.
NOTICE
6.3. LOADING AND CLAMPING THE WHEEL
Loading the wheel (fig.15)
a -
Place the wheel on the lift.
b - Lift the wheel by operating the pedal
(1-Fig.15a).
c - Transfer the wheel to the turntable by
hand and lower the lift by operating the
pedal (1-Fig.15a).
d - When positioning the wheel on the turn-
table, also take care to align the mobile
pin, on the edge of the turntable, in one
of the fixing bolt holes in the rim (Fig.15a).
WARNING
14
15