7
Installation and Operating Instructions Ahti & Ukko
4) Install the heater stone shelf: there are
metal fastening pins for the shelf, located
on the inside of the heater, approximately
9 cm downward from the upper end of the
air deflector. Insert the support arms of
the heater stone shelf in the rearmost pins
diagonally from the top (1) and turn the
shelf by the arms so that it rests on the front
fastening pins (2). After that, the heater
stones can be stacked on the shelf (see Figure
3.6).
5) Attach the background stone (see Figure 3.7).
6) When stacking the stones, ensure that you
do not place
small heater stones among the
resistors or on top of the ventilation grill
located at the top edge of the heater
(see
Figure 3.8).
After the assembly, remove all plastic films,
including those from behind the deflector.
Dents caused by the user or others are not
covered by Mondex’s warranty or other product
liability. When stacking the stones, be careful not
to dent the heater’s metal or painted surfaces to
avoid damaging them. For more information on
the warranty and replacing stones, see page 12.
Figure 3.7
Figure 3.8
.3
1
2
Figure 3.6