2
1.1 Display Panel
The display panel consists of a backlit, liquid crystal display with six
alphanumeric digits which indicate modes, flash rates, etc.
Other icons or messages in the display indicate the following:
Battery icon:
displayed when the battery is getting low. There is
protection circuitry in the unit that will prevent the battery from
being over discharged or prevent the unit from being operated
with a low battery.
On-Target Indicator:
for
Tachometer Mode and Remote Sensor
in External Input Mode
Lock icon:
shown to indicate that the strobe is locked on
External Input Mode
: displays when mode is activated
Tachometer Mode:
displays when mode is activated
Divide/Multiply by 2:
when this icon is shown, rocking the tuning
button to the left will divide the current flash rate by two and
rocking the tuning button to the right will multiply the current
flash rate by two.
2.0 PREPARATION FOR USE
PALM STROBE x may be hand held or mounted on a tripod or other user
supplied bracket using the ¼-20 UNC bushing in the base of the unit.
Battery Recharger
Socket
EXT
TACH
÷
2
x
2
Figure 2 Display Panel
