20
Press the MENU button to enter the MEMRY menu.
Use the right arrow
►
on the joystick to toggle between SM
(Save Memory) or RM (Recall Memory).
5.5.1 Save Memory
To STORE the current strobe setting into a memory location:
Once in the Memory (MEMRY) menu, press the
►
arrow on the
joystick to enter the Save Mode indicated by SM on the display. Use
the
▲
and
▼
arrows on the joystick to select one of the memory
locations in which to save the settings — SM1, SM2...SM10.
Press the MENU button followed by the Power button to save the
current strobe setting into the displayed location. The current flash
rate will then be shown in that location.
To exit without saving a value press the POWER button.
5.5.2 Recall Memory
To RECALL a saved strobe setting:
Once in the Memory (MEMRY) menu, make sure the you are in the
Recall Mode as indicated by RM on the display. Use the
▲
and
▼
arrows on the joystick to select one of the memory locations from
which to load the settings — RM1, RM2...RM10.
Press the MENU button followed by the Power button to recall the
setting from the selected location.
To exit without recalling a memory location, press the Power
button.
MENU button
POWER button
On-Target Indicator
Joystick Arrows
