22
The time value will be shown in milliseconds. Use the joystick to
set the desired value (refer to
). Time can be set from
-50.000 msec to +50.000 msec.
Press the MENU button to accept and exit.
To exit the JOG Menu, press the Power button.
NOTE:
Once a setting has been selected using PHASE and TIME in the
JOG menu, that setting will persist even through a power cycle.
The PHASE/TIME icon will be illuminated on the display to let the user
know that the delay is being applied to the flash setting. To remove
the setting, navigate to the JOG menu and use the joystick to select
NONE. Multiple PHASE or TIME settings can also be added as a
parameter in any of the 10 MEMORY locations. (Refer to
5
)
5.7
DELAY Menu (Nova-Pro 500 ONLY)
This menu option is only valid on the
Nova-Pro 500
in the
STROBE
Mode
with an
External Input
or in the
Laser Mode
. Refer to
for details on DELAY before using this menu item. All delays are
relative to an external trigger which may be derived from the internal
laser or external input.
Press the MENU button to enter the DELAY menu. The current setting
will be shown and the On-Target indicator will be on for the currently
selected value.
Use the arrows on the joystick to select the desired Delay method.
The options are: NONE, PHASE, TIME and VRPM.
Press the MENU button to select a Delay method. This will enter the
sub-menu for PHASE, TIME or VRPM.
MENU button POWER button On-Target indicator Joystick arrows
MENU button POWER button On-Target indicator Joystick arrows
