18
English
the next parameter . To deactivate the bar graph,
press the button “Menu / OK” .
When all settings have been made, the bar
graph will automatically disappear at the end of
the display time set in the OSD menu . When a pic-
ture parameter is selected and no setting is made,
the bar graph will already disappear after a few
seconds .
Notes concerning the change of parameters
1 .
Contrast … Sharpness
for AV, HDMI and HDMI 2
As soon as the value of a parameter is changed, the
monitor will go to the picture mode
User
and save the
change for this mode only .
2 .
Red
,
Green
,
Blue
Before changing the values of these parameters, set the
option
User
for the menu item
Color Temp.
in the OSD
menu (
☞
chapter 6 .11 .1) . This is the only way to save
the modified values as individual settings under
User
.
6.6 Muting the sound
To mute the sound, press the button :
Mute
will
appear in the top left corner of the picture (it will
disappear when the button “Menu / OK” is pressed
or when another function is activated) .
To unmute, press the button once again . The
sound will also be unmuted when the source name
is indicated, when the source is changed or when
the volume is changed .
6.7 Selecting the picture format
Use the button “Zoom” to switch between differ-
ent picture formats (not possible for the source PC):
Full
Zoom1
Zoom2
4 : 3
Panorama
14 : 9
The indication of the picture format will disappear
at the end of the display time set in the OSD menu .
6.8 Freeze function
To freeze the picture (not possible for the source
PC), press the button “Freeze” .
Freeze
will appear
in the top left corner of the picture . It will disappear
at the end of the display time set in the OSD menu .
It will also disappear when the button “Menu / OK”
is pressed .
To unfreeze the picture, press the button
“Freeze” again . The freeze function will also be
deactivated when another source is selected .
6.9 Multi-picture display
In case of a multi-picture display, the picture of a
secondary video source (secondary picture) will be
displayed together with the picture of the video
source selected (main picture) . The multi-picture
display is adjustable via the OSD menu or via the
remote control; however, the menu offers addi-
tional setting options (
☞
chapter 6 .11 .5) .
1) To switch between the display modes, press the
button “PIP/ ”:
no multi-picture display
small secondary picture in the main picture
medium-size secondary picture in the main
picture
large secondary picture in the main picture
pictures side by side in full aspect ratio
pictures side by side in the format 4 : 3
Each time you switch to another mode, the
names of the sources will briefly appear in the
top left corner of the screen (name of the sec-
ondary source underneath the main source) .
2) To select the secondary video source, press the
button “Source / ” .
Note:
For multi-picture display, the sources HDMI and
HDMI 2 cannot be selected both at the same time .
3) To switch between four positions of the second-
ary picture for a picture-in-picture display, press
the button “Position”:
left top
left bottom
right bottom
right top
4) To swap the picture assignment of the two
sources in the multi-picture display, press the
button “Swap” .
When the video source is changed with the buttons
“PC / HD” or “AV1/AV2”, the monitor will return
to the single-picture mode .
