Monacor IOR-204, Instruction Manual

Page: 43 / 56

43
English
4) In the line “Password Enable”, select the option “Enable”.
With the option “Disable”, the corresponding user can
operate the recorder without entering a password.
5) To save the settings, click “Save”; for a reset to the factory
settings, click “Default”.
6) To grant specific rights to the user created, click the
symbol in the corresponding line.
1 2 3 4 5 6 7 8
5 6 7 8
5 6 7 8
5 6 7 8
1 2 3 4
1 2 3 4
1 2 3 4
User Name user1
Log Search Parameter Auto Reboot Manuelle Record
Disk
Backup
Live
Playback
PTZ
Remote Login SEQ Control
Cancel Save Clear All
User Permission
Fig. 6-26 Menu for the user rights
Define the user rights in this menu and save them.
6.6.10 Intelligent image analysis
Some IP cameras (e. g. the model IOC-2812BV or IOC-2812DV)
can analyze images in different ways and can, when a specific
situation is detected, cause the recorder to trigger specific
actions.
PID Perimeter Intrusion Detection
Detection of persons or objects intruding into a defin-
able area
LCD Line Crossing Detection
Detection of persons or objects passing a definable line
SOD
Stationary Object Detection
Detection of objects lost or left behind in a definable area
PD Pedestrian Detection
Detection of moving persons (pedestrians) in a definable
area
FD
Face Detection
Detection of faces in a definable area
CC Cross Counting
Determination of the number of persons or objects pass-
ing a definable line
Sound Detection
Sound Analysis
For cameras with an integrated microphone, the micro-
phone signal can be analyzed
Occlussion Detection Detection of lens tampering
An alarm can be triggered when, for example, the lens
of the camera is readjusted
1) Call up the tile menu and then, in the tile “Channel”, click
the menu item “Intelligent”.
CH1
CH2
CH3
CH4 4 Indoor
LCD SOD PD FD CC Sound Detection Occlusion Detection Schedule CC Statistics PID
2 Indoor
1 Outdoor
3 Outoor
Alarm Apply
Channel Setup Switch Sensitivity Scene
Fig. 6-27 Settings for intelligent image analysis
2) In the header “PID LCD … CC Statistics”, click the appro-
priate option to select the analysis type to be used. Only
the channels whose camera supports the function selected
will be shown.
Menu item Function
Channel To select a camera channel
Setup
Click to define up to 4 detection fields (for “LCD
and “CC”, up to 4 lines).
1. Click the left mouse button to define the four
corners of the field or the two end points of
the line. When you draw a field, make sure that
there is no notch in the field; otherwise, an error
message will be shown.
2. To activate the field/line: In the menu to the left
of the image, click the symbol
⃠
in the line
“Rule Switch” (to deactivate, click
✔
).
3. In the line “Rule Type”, define the motion direc-
tion that is to trigger an action:
A->B = motion going into one direction
B->A = motion going into the other direction
A<->B = motion going into both directions
The directions are indicated by the arrows.
4. To change a field / line, click the red square to the
left of the field number / line number. Keep the
left mouse button pressed and move the corners.
To move the entire field / line, place the mouse
pointer into the field / on the line and keep the
left mouse pressed.
5. To save the settings, click “Save”.
6. To remove all fields/lines, click “Remove All”;
to remove the field/line selected, click “Remove”.
7. To go back to the menu, click the right mouse
button in the camera image.
Switch To enable / disable the analysis feature
Sensitivity
Sensitivity of the analysis feature (1 – 4);
the higher the value, the more sensitive the analysis
feature
Scene Location of the camera: indoor or outdoor
Alarm
To show the submenu for the actions to be taken in
case of a positive analysis result (e. g. alarm sound,
recording time, sending an e-mail); also refer to the
function overview in chapter 6.6.6, if required.
Apply To save the setting
IMPORTANT! For an analysis with clear results, make sure
that
– the fields or lines are not too close to the edges of the
image
– the fields are not too narrow and the lines are not too
short
– the fields or lines are not masked (tile “Channel”, menu
item “Video Cover)