A.S. 04.03.15/ISSUE D
FILENAME: SD-69008-0140
ADJUSTMENTS
1)
If termination height is incorrect then follow the procedure
below.
2)
Loosen the stud nuts in the centre of the Arbor Press.
3)
Loosen clamp bolt to column at the rear of the Arbor Press.
4)
Adjust upper part of Arbor Press up or down using the nuts
on the central stud.
5)
Re-tighten nuts and clamp bolt.
6)
Recheck termination height.
MAINTENANCE
1)
Keep fixture clean at all times.
2)
Clean fixture with brush.
3)
Oil moving parts weekly, when in use.
4)
Store in a clean dry environment.
SPARE PARTS
Insertion Punch 8/6 Way 69020-0122
Insertion Punch 8/8 Way 69020-0127
Strain Relief Punch 69020-0146
