AT-1994 Air Head Crimp Tool
Doc. No. ATS-640050400
Release Date: 09-23-02
UNCONTROLLED COPY
Page 1 of 7
Revision: K
Revision Date: 01-09-15
Air Powered
Crimp Tool Head
Insulkrimp
Type AT
Application Tooling
Specification Sheet
Order No. 64005-0400
Engineering No. AT 1994
FEATURES
Quick change tool head for the 19279-0001 (AT-200)
Tooling kit is interchangeable with other kits in the 64001 and 64003 Series
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position for
each of the three nests
3-nested tool eliminates the need for additional tools
Pneumatic powered crimp tools help reduce fatigue and discomfort from repetitive manual crimping
SCOPE
Products: InsulKrimp
Quick Disconnects Terminals 10–22 AWG. This tool head is intended for use in the
19279-0001 (AT-200) either hand held or with optional bench adapter 19078-0307 (ATBA) and
foot switch.
Testing
Mechanical
The tensile test, or pull test, is a means of evaluating the mechanical properties of the crimped connections.
The following charts show the UL specifications for various wire sizes. The tensile strength is shown in
pounds and indicates the minimum acceptable force to break or separate the terminal from the conductor.
Wire Size (AWG) *UL - 310
22
8
20
13
18
20
16
30
14
50
12
70
10
80
*UL – 310 – Quick Disconnects
The following is a partial list of the product part numbers and their specifications that this tool is designed to
run. We will be adding to this list and an up to date copy is available on www.molex.com.
Wire Size: 18 – 22 AWG 0.80 – 0.35mm²
Terminal
No.
Terminal
Eng. No. (REF)
Wire Strip
Length
Insulation
Diameter Maximum
In mm
In
mm
19003-0001
AA-2201
.234 5.94
.135
3.43
19003-0005
AA-2201VN
.234 5.94
.135
3.43
19003-0008
AA-2201X
.234 5.94
.230
5.84
Wire Size: 18 – 22 AWG 0.80 – 0.35mm²
Terminal
No.
Terminal
Eng. No. (REF)
Wire Strip
Length
Insulation
Diameter Maximum
In mm
In
mm
19003-0011
AA-2202
.234 5.94
.135
3.43
19003-0014
AA-2202X
.234 5.94
.230
5.84
19003-0017
AA-2203
.234 5.94
.135
3.43