molex 638019100, Operation Manual, Page: 14 / 20

Auto Grip Pull Tester
Doc No: TM-638019100 Release Date: 08-10-09 UNCONTROLLED COPY Page 14 of 20
Revision: E Revision Date: 03-19-21
2.5
Removing the Display Module
See Figure 2-13
The display module can be easily removed for recalibration or repair. To do this:
1. Loosen the cap screw on the display module mounting bracket and slide the mounting
bracket off the base.
2. Remove the (4) M4 Phillips screws from the back of the mounting plate.
3. Remove the display module.
MOUNTING
PLATE
CAP SCREW
Figure 2-13
5mm HEX
WRENCH
Figure A
Figure B
Figure C
Figure D
Figure 2-12