molex 63800-7950, Instruction Manual, Page: 2 / 21

Crimp Force Monitor
Doc. No: TM-638007950 Release Date: 03-21-13
UNCONTROLLED COPY
Page 2 of 21
Revision: A Revision Date: 03-21-13
Safety Warnings and Information
Read and understand all of the instructions and safety information in this
manual before operating or servicing this tool.
Keep this manual available when using this tool.
Replacement manuals are available for download at no charge at
www.molex.com.
SAFETY ALERT SYMBOL
This symbol is used to call your attention to hazards or unsafe practices which could result in an injury
or property damage. The signal word, defined below, indicates the severity of the hazard. The message
after the signal word provides information for preventing or avoiding the hazard.
DANGER
DANGER:
Indicates an imminently hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
may also be used to alert against unsafe practices associated with events that could lead
to personal injury.
WARNING WARNING
Always wear proper eye protection when
operating or servicing a press.
Failure to wear eye protection could result
in serious eye injury from flying debris during test.
Never install or service this unit while
connected to any electrical power source.
Disconnect power by unplugging the AC adapter
.
Failure to observe this warning could result
In severe injury or death.
WARNING WARNING
Never operate, service, install, or adjust this
equipment without proper instruction and without
first reading and understanding the instructions
in this manual and all applicable press and/or
wire processing machine manuals.
Do not use compressed air to clean
this equipment. The forces created by
compressed air can force debris into the unit.
Failure to observe these precautions may
result in injury or property damage.
WARNING WARNING
Never operate a press without safety devices
that are intended to prevent hands from remaining
in the tool.
Failure to observe this warning could
result in severe injury or death.
Do not expose this equipment to moisture.
To prevent fire and shock hazard,
always unplug the AC line cord prior to servicing.
Failure to observe this warning could result
In severe injury or death.