Tool Kit for Slip-On Wire-to-Wire Crimp Terminals
Doc No: ATS-6381973HM Release Date: 04-30-09
UNCONTROLLED COPY
Page 1 of 9
Revision: B
Revision Date: 10-11-10
INSULATION
CRIMP
BRUSH
STRIP
LENGTH
TERMINAL
STRIP
CONDUCTOR
CRIMP HEIGHT
CUT-OFF
TAB
SEAM
BELL MOUTH
WIRE
Application Tooling
Specification Sheet
Tool Kit
Order No. 63819-7370
Hand Crimp Tool
Order No. 63819-7300
FEATURES
%
A full cycle ratcheting hand tool ensures complete crimps
%
Ergonomically designed soft handles
%
Precisely designed crimping profiles with simple contact positioning
%
Easy handling due to outstanding force ratio
Tool kits are easily installed into the Hand Crimp Tool or the 63816-0300 Power Crimp Head which is installed
into the 63816-0200 (110 V) or the 63816-0250 (220 V) Battery Powered Tool.
Many different Tool kits can be used with a single Battery Powered Tool.
This tool is IPC/WHMA-A-620 Class 2 and RoHS compliant.
SCOPE
Products: 6.35mm (.250") Tab Slip-On Wire-to-Wire Receptacle Terminal, 14 -18 AWG.
Terminal Order No.
Wire Size
Insulation Diameter
Strip Length
AWG
mm
In.
mm
In.
35725-5110
14 - 18
3.60 maximum .142 4.40 – 4.80 .173 - .189
Customer to cut off terminal from reel: 0.50mm (.019”) maximum Cut-off Tab.
DEFINITION OF TERMS
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
TYPE 2C
