ScriptingScript Editor
120
0112-0133 Rev B
Command Definitions
All of the available commands are listed in the left column. These include
StakMax commands, SoftMax
®
Pro commands, Advanced SoftMax Pro
commands, and Miscellaneous (Misc) scripting commands.
StakMax
®
Commands
Reset:
resets the stacker to the initial startup state/position.
Home:
returns all axes of the stacker to their Home positions.
Load Plate:
moves one plate from the input stack to the reader.
Return Plate:
moves one plate from the reader to the output stack.
Restack:
moves all plates from the output stack to the input stack.
Cycle:
moves all plates from the input stack to the output stack.
Record Barcode:
sets the current barcode (a variable in the scripting
system) to that of the plate most recently scanned by the barcode reader.
SoftMax
®
Pro Commands
New Document:
creates a new SoftMax Pro document or opens an
existing protocol.
Close Document:
closes the current SoftMax Pro document.
Open Protocol:
opens an existing protocol. You must specify the correct
path for the protocol.
Open Document:
opens an existing SoftMax Pro document. You must
specify the correct path for the document.
Save Document As:
saves the current document as the name you type in
the command editor field. You must type a the complete path and file
name.
Close All Documents:
closes all SoftMax Pro documents.
Note:
See the
SoftMax
®
Pro User Guide
for a detailed description of
SoftMax Pro commands.
Summary of Contents for StakMax
