Software Configuration
16
SkanWasher 400 User Guide
Setup Function
The
[Setup]
key is used to enter the
Setup
window.
When in Setup mode, the
[Setup]
key is used to move backward. If
an error occurs, press the
[Setup]
key to go back a step.
The
[Enter]
key is used to select an item in a list or a value.
The arrow keys
are used to place the cursor on an item in a list or
to scroll through values. To continue to scroll through values, keep
the arrow key depressed.
When pressing the
[Setup]
key, the Setup Main menu will display two
options:
Edit Program A wash program can be edited or created using this selection.
Edit Options
Instrument parameters can be viewed and sensor enabled/
disabled.
Edit Program
Step 1
Press
[Setup]
to enter the Setup window. The Setup LED will illu-
minate.
Step 2
Select Edit Program.
Use Up/Down arrow keys to move cursor to selection.
Press
[Enter]
.
Step 3
Select the program to be edited or select an open space to create a
new wash program.
Use the Up/Down arrow keys to move cursor to selection.
Press
[Enter]
.
!! IMPORTANT:
To save the
changes made, Exit/Save must be
selected after program setting
completed.
