Molecular Devices MultiWash+, User Manual

Page: 69 / 152

Chapter 6: Defining a Wash or Rinse Cycle
5032022 C 69
Select the Duration of the Aspiration for the Cycle
Define the duration time for the aspiration in the cycle from 0 seconds to 10.0 seconds. The
aspiration duration is the amount of time that the aspiration needle on the manifold stays
inside a well during aspiration.
Figure 6-4: The Aspiration Time prompt
Button Action
On the left
Press this button to return to the previous step. See Confirm or Change the Name of
the Cycle on page 67 .
On the right
Press this button to end the process and return to Define Cycle without saving any
changes. See Defining a Wash or Rinse Cycle on page 65 .
Press this button to add time to the duration in 1 second intervals to a maximum of
10 seconds.
Press this button to subtract time from the duration in 1 second intervals to a
minimum of 0 seconds.
Press this button to confirm the duration and then define the speed of the aspiration
for the cycle. See
Select the Speed of the Aspiration for the Cycle on page 70 .
Table 6-4: Actions of Control Panel Buttons