Molecular Devices MultiWash+, User Manual

Page: 23 / 152

Chapter 2: Using the Instrument
5032022 C 23
Software Overview
The top-level menus can be accessed by pressing the buttons on the control panel.
Menu Description
From Run Procedure , select a previously defined wash or
rinse procedure from the list. See Running a Procedure
on page 25 .
From Prime/Rinse , define and run a manual, automatic,
or periodic prime or rinse cycle. See Priming or Rinsing
the Fluidics System on page 31 .
From Define Procedure , define and save procedures
using defined cycles and defined microplate types. See
Defining a Procedure on page 51 .
From Define Cycle , define and save wash or rinse cycles
to be used in procedure definitions. See Defining a Wash
or Rinse Cycle on page 65 .
From Define Plate , define and save microplate types to
be used in procedure definitions. See Defining a
Microplate Type on page 77 .
From Setup , customize the instrument set up for your
requirements. See Selecting Instrument Set Up Options
on page 113 .
The Service menu is intended to be used by Molecular
Devices trained personnel only. See Obtaining Support on
page 142 .
Table 2-1: Top-Level Menus