Transmitted Light Option Operations
5014166 D
65
To use the phase ring adjustment lens on the ImageXpress Micro
Confocal System
1.
Exit the MetaXpress Software if it is running.
2.
Click
Start > Programs > MetaXpress
and then right-click
Meta
Imaging Series Administrator
and select
Run as administrator
to
start the MetaXpress Meta Imaging Series Administrator
software.
3.
Click
Configure Hardware
.
4.
In the
Configure Hardware
dialog, select the correct hardware
configuration, and then click
Configure Devices
.
5.
In the right pane of the
User Settings for hardware configuration
dialog, click
IXConfocal Module Emission Wheel
, and then click
Settings
.
Figure 4-12:
User Setting Selection of IXConfocal Module
Emission Wheel Settings
ImageXpressOptionsUserGuide.book Page 65 Wednesday, September 9, 2015 3:54 PM
