Fluidics Option Operations
5014166 D
43
Doing Fluidics Experiments
Fluidics experiments are defined by adding events to the Scheduled
Events list. You can add three types of events: Compound Addition,
Washout, and Journal. Fluidics events can be performed on all wells
being imaged, or on a subset of wells. For example, you can add different
amounts of compound to different wells, or treat wells for different
amounts of time.
Do the following procedure to configure a fluidics experiment.
To configure a fluidics experiment
1.
In the MetaXpress software, click
Screening > Plate Acquisition
Setup
.
2.
On the
Plate Acquisition Setup
dialog, on the
Configure
tab,
open the
Acquisition
tab.
Figure 2-11:
Plate Acquisition Setup dialog: Configure tab,
Acquisition tab
3.
Under
Configure
, click
Fluidics
to schedule fluidics events. See
.
ImageXpressOptionsUserGuide.book Page 43 Wednesday, September 9, 2015 3:54 PM
