PUMP/TANK CONNECTION MANIFOLD
MEDICAL ELECTRICAL EQUIPMENT
WITH RESPECT TO ELECTRICAL SHOCK, FIRE, MECHANICAL
AND OTHER SPECIFIED HAZARDS ONLY
IN ACCORDANCE WITH UL-60601-1, CAN/CSA C22.2 NO.601.1 66CA
C
LA
SSIFIE
D
Pump/Tank Connection Manifold Using Accessory Kit
Flat Side Installed
Facing Up
Compression
Gasket Connector
to Pump
1-1/2” FNPT to
Sanitary Tee
Sanitary Tee with 1-1/2” FNPT End
Fitting. 3 or 4 depending on system
configuration. (Supplied by Plumber)
3” PVC or Copper
Tubing & Elbow
(Supplied by Plumber)
1.5 ft
3 or 4 Supplied
Check Valves -
See Kit
P/N
MIK4
Check Valve Installed
Flat Side Facing Up
Horizontal to Floor
3” PVC or Copper
Clean-out Plug Used with P/N
MIK4
(Supplied by Plumber)
Air F
low
2” PVC or Copper
Tubing for Tank Hose
(Supplied by Plumber)
Check Valve Side
View
CT20 TANK INLET CONNECTION DETAIL
6-inch
Riser
Customer-
Supplied Tee
Connector
3/4
FNPT
2” Flexible
Coupling
Connector
1/4-inch
Vacuum
Sample Port to
Master Controller
Reducing
Bushing
Swivel
Elbow
2” Pipe for
connection
to Facility
Piping from
Operatory.
Note: Hang using at least 3 pipe
supports supplied by Plumber.
Hoses From
Manifold To Pumps
Hose Between Manifold
and CT20 / CT22 Tank
Secured by Flexible
Couplers
V3, V5 & V7
PUMP HOSE
CONNECTION
DETAIL
Hoses From
Manifold To Pumps
Hose Between Manifold and
CT20 / CT22 Tank Secured
by Flexible Couplers
Hose from Manifold Connected to Pump
via Air Input Filter Gasket Connector
1 ft
