Mohawk V-035-A-X, Operation And Maintenance Manual

Page: 44 / 112

MV-A00000920 MOHAWK V-A SERIES: VERTICAL RISE DRIVE-ON MANUAL 35,000 - 64,000 LB MODEL 4-16
4.11. Checks before use
Having completed installation of the table, the following tests must be performed before it can be used for work:
TESTS STANDARDS
1 Table levelling using spirit level.
Max 0.5 mm per meter / 0.006 inches/foot

2 GAP between the plates and the height of the spring.
(see: Check)
3 Sturdiness of anchors fastening to the floor.
Tightening torque (see: Anchorage capsule
installation paragraph )

4 Pneumatic connections.
Diagram ( see: Pneumatic diagram paragraph)

Air leakage

5 Hydraulic connections.
Diagram ( see: Hydraulic Diagram paragraph)

Oil leakage

Pressure

6 Wiring. Diagram ( see: Wiring Diagram)

7 Safety devices. (See: Safety device features paragraph)

8 The compressed air system must be powered by filtered and lubricated air
Presence of a filtering system.

9 Oil level.
Oil level rod

10 Direction of rotation of motor. Arrow on motor

11 Plant cable and piping protection.
Cable and pipe runs provided.

12 In case of upstroke from opposite side to the torsion bar. Presence of up ramp (optional).

13 Never load vehicles whose overall dimensions exceed those of the lift.
Loading conditions ( see paragraph: Loading
conditions)

14 Never load vehicles weighing more than the lift's nominal capacity.
Capacity indicated on plate.

DATE SIGNATURE