FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
DESCRIPTION
•
Metal construction with various finishes identified by suffix
•
1/2" copper connections
•
Designed to be installed through 2, 1-1/4" and 1, 1" min. dia.
holes, 8" on center
•
Adaptable for non-8" centers
OPERATION
•
Maximum handle rotation angle is 90˚ to full on for either handle
•
Rotate hot side counterclockwise to open and clockwise to close
•
Rotate cold side clockwise to open and counterclockwise to close
Flow
•
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
•
1224 cartridge design nonmetallic/nonferrous and stainless steel
material
STANDARDS
When trim kit is added to M-Pact valve, the product is:
•
Third party certified to WaterSense,® ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein
•
Certified to ANSI/NSF 61/9
•
Complies with California Proposition 65 and with the
Federal Safe Water Drinking Act
• ADA
for lever handle
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
•
5 year warranty if used in commercial installations
Icon™
Two-Handle Wall Mount Faucet
Models:
T6530 series
3"
(8mm)
4-3/16"
(11mm)
7-1/2"
25˚
(19mm)
Escutcheon Dia.
2-1/4" (8mm)
MAX WALL THICKNESS
1-3/4” (45mm)
1-7/8"
(48mm)
Rev. 7/08
M
•
Pact™ System
