background image

Hardware

 

Device Description Embedded HMI-PLC XV-23x-57

 

EU Conformity/Safety

 

15 EU C

ONFORMITY

/S

AFETY

 

 

15.1 EMC 

The XV-23x-57 meets the requirements specified by the EU Council Directives for harmonizing the 
regulations of EU member states relating to electromagnetic compatibility (

89/336/EEC

). 

 

 

15.2 E

XPLOSION PROTECTION

 

15.2.1 

 

Z

ONE 

22, C

ATEGORY 

3D 

The XV-23x-57 meet the requirements specified by the EC Council Directives for harmonizing the 
regulations of EC member states for the proper use of devices and protective systems in hazardous 
areas (94/9/EEC) for Zone 22, Category 3D. 

 

Information on the nameplate 

 

 

 

II  3D  X 

T 70°C 

EEx II 

IP5x 

 

 

 

The X on the nameplate stands for: 
 
Must not be subjected to dangerous blows and nor erected in the tracks of 
cranes. 
 
In order to achieve protection compliant with IP5x, installation must be carried 
out with the supplied seal and the optional fixing bracket kit for IP65. 
 
Ambient temperature range 0°C 

Ta 

 +50°C

    

 

Applicable standards: 
EN 50014 

Electrical apparatus for potentially explosive atmospheres 

EN 60079-0   

Electrical apparatus for explosive gas atmospheres. General requirements 

EN 50281-1-1 

Electrical apparatus for use in the presence of combustible dust 

Part 1-1:  

Electrical apparatus with protection by enclosures – design and testing 

EN 13463-1 

Non-electrical equipment for potentially explosive atmospheres 

 

 

 

 

 

 

 

 

 

12/05 AWB2776-1581GB   

© by Moeller GmbH 

31

 

Summary of Contents for XV-23-57 Series

































Reviews: