4 Installation
4.1 Safety instructions
20
XP-503 01/2017 MN048014 EN www.eaton.com
4
Installation
4.1
Safety instructions
Before installing and commissioning the device, make sure to read chapter 3, "Safety
instructions." Chapter 3 contains important information regarding your own personal
safety.
4.2
Unpacking and checking the package contents
Unpacking
Check the XP-503's packaging for transit damage.
Carefully remove the packaging in order to avoid damaging the device.
Keep the original packaging so that you will be able to use it in the future if you need
to transport or ship the XP-503. Make sure to also keep the documents enclosed with
the device.
Verify
Check the package contents for visible transit damage.
Use the package insert to make sure that the contents are complete.
4.3
Storage and transportation
The XP-503 is sturdily built, but the components inside it are sensitive to excessively strong vibrations
and mechanical shock.
Accordingly, make sure to protect the XP-503 from excessively large mechanical loads.
The device should only be transported in its original packaging, complete with all shock-absorbing
parts.
If storing/transporting the device in cold weather conditions or in such a way that it
will be exposed to extreme differences in temperature, make sure that no
condensation forms on or inside the device.
4.4
Installing
The Panel PC XP-503 is approved for use in closed spaces.
When installing the XP-503, make sure to also consult the "Technical data" chapter.
The following requirements and instructions must be observed without fail in order to
ensure that the XP-503 will run properly and will not be damaged.
