Moeller XControl XC600, Hardware, Engineering And Function Description, Page: 49 / 78

07/04 AWB2700-1428GB
45
5 Menu overview of the operator module
The operator module allows you to enter parameters or modify
PLC states. The display, with 4 lines of 12 characters each, shows
a menu structure in which you can use the menu selector switch
(MSS) to call up the submenus (items): select a menu item by
turning the switch, accept (enter) the item by pressing the switch.
Numbers or letters can be entered by turning the switch. Pressing
the switch always accepts the entry and moves the entry position
on the next field.
The entry position is always shown on menus with static
parameters. The edit mode can be selected by turning the MSS
from BACK to EDIT. If the MSS is turned further, the menu item
ENTER will be displayed. Pressing the MS when it is in this position
means that the parameter is finally accepted. Each submenu has
the menu item BACK, that is used to select the level above, i.e. the
menu that you had previously selected.
Menu overview of the MAIN MENU:
DIAGNOSTICS
EVENT
ERROR
CLEAR
PROGRAM
RESET
WARM
COLD
HARD
INTERNAL
DISPLAY
ACTIVATE
COPY
DELETE
EXTERNAL
DISPLAY
ACTIVATE
COPY
DELETE
LOAD
RECIPE
INTERNAL
DISPLAY
COPY
DELETE
EXTERNAL
DISPLAY
COPY
DELETE
DEVICE
NETWORK
IP-ADDRESS
IP-MASK
GATEWAY
NAME
DATE/TIME
SECURITY
PASSWORD
ACTIVATE
LANGUAGE
ENGLISH
GERMAN
FRANCAIS
ITALIANO
SOFTWARE
HARDWARE
CONFIGURE
AUTOCONFIG
SYSTEM