Moeller XControl XC600, Hardware, Engineering And Function Description, Page: 32 / 78

Creating an Example Project
07/04 AWB2700-1428GB
28
Setting the target system
Once XSoft has started, create a new file:
X
Choose File r New menu.
X
Answer the query about saving the old project.
X
Set the target system, e.g. XC-CPU601-E4M.
The following window with four tabs will appear:
X
Select Program as POU type and IL as POU language.
X
Confirm your selection with OK.
A window will appear in which you can program or configure
systems:
Configure XC600 with local signal modules
A local signal module behaves similar to a decentral (distributed)
signal module on a PROFIBUS DP gateway. The gateway is
simulated with the aid of software for the local signal module, so
that configuration, programming and test for local and decentral
signal modules are identical.
Parametric programming of the user parameters is also included
(
a
figure 49). They determine the behaviour of the gateway e.g.
with a fault on a signal module.
The parameters are described in the AWB2700-1394 "XI/ON
PROFIBUS DP" in the “Parametric programming” chapter.
X
Click the Resources tab to configure the XC600 with local
inputs/outputs.
The following window will appear:
Figure 41 : Main window for target system settings
Figure 42 : Selecting the POU type
Figure 43 : POU type “Program” in IL format