Moeller S40-AM-TD, Manual

Page: 44 / 85

Parameter function block
41
02/02 AWB27-1300-GB
Table 7: Outputs for the telecontrol station
Outputs Data
type Description
ready BOOL As soon as the output is active, the connection is established and
the telecontrol function block is ready to perform services.
tra_active BOOL Indicates that a service that was initiated by the station itself
is in progress. If job processing is terminated, this signal reverts
to “0“.
tra_result BOOL “tra_result” is updated after a falling edge on the “tra_active”
output. “tra_result” = 0 denotes that there has been an error in
executing the service.
tra_fail BOOL An error indicated at a station that has activated a service. It is
updated with every falling edge of the “tra_active” output.
rec_active BOOL Indicates the processing of a service. If job processing is
terminated, this signal reverts to “0“.
rec_result BOOL “rec_result” is updated after a falling edge on the “rec_active”
output. On “rec_result” = 0 means that an error has occurred
during execution of a service.
rec_fail BOOL An error indicated at a station that has received a service. It is
updated with every falling edge of the “rec_active” output.
rec_length
1)
USINT Number of data bytes in a data frame activated by the
partner station.
rec_subaddress
1)
USINT Subaddress in a data frame activated by the partner station.
rec_offset
1)
USINT Offset address in a data frame activated by the partner station.
rec_flash_
segment
1)
USINT Segment number of the flash memory or RAM memory card to
which the partner station has access.
rec_action
1)
USINT Code of the service received that was activated by the
partner station.
rec_com_ref
1)
USINT Communication reference for which a frame has been input.
rec_information
2)
STRING Received text string relayed using service 33 by the
partner station.