Moeller ps4-201-mm1, Hardware And Engineering

Page: 7 / 94

3
04/
99 AW
B
27-
1184 G
B
About this Manual
Documentation for
the PS4-200 The documentation for the PS4-201-MM1 compact
PLC (referred to below as PS4-200) is subdivided
into four manuals with the following topics:
Hardware and engineering
User interface for the programming software
Programming
Training guide
Hardware and engineering manual
This manual, “Hardware and Engineering”, explains
how the PLCs are to be installed and engineered. It
describes the elements of the PS4-200 and tells you
how to alter the settings.
The configuration and setting of PLC parameters is
carried out in the topology configurator of the
programming software. This is described in the
chapter “Software configuration”.
The chapter “Slave addressing” defines the general
syntax rules for addressing the stations in a
Suconet K network.
The chapter “Test/commissioning/diagnostics”
provides an overview of the possible error and
diagnostic signals and their meanings.
Manual for user interface for the programming
software
To program the PS4-200 you need the Sucosoft S 40
programming software
(Windows, IEC 1131).
The user interface for the software is described in the
manual AWB2700-1305GB.