CANopen Interface
12
05/04 AWB1230-1543GB
Setting the DMI outputs
The Tx-PDO channel 1 is used to set the outputs and operate
the motor starter functions. The corresponding data can be
used for direct setting of the DMI outputs.
3 data bytes are transmitted, which are arranged as follows:
Byte 0: always 14
hex
.
Byte 1:
1) With reversing star/delta starter.
2) With star/delta DOL starter.
3) With reversing starter.
4) Without motor starter function.
5) With DOL starter.
Meaning
Bit
7
6
5
4
3
2
1
0
Output 4
1/0
Output 3/reserved
1)
1/0
Output 2/reserved
2)
1/0
Output 1/anti-clockwise
3)
1/0
Output 0
4)
/ON
5)
/clockwise
5)
1/0
Reserved
0
Actuate circuit-breaker
1/0
1/0
Summary of Contents for DeviceNet NZM-XDMI612
Page 4: ......