Moeller AWB2700-1426GB, Manual

Page: 31 / 97

Diagnostic Messages of the
Performance Module
27
11/01 AWB2700-1426GB
2
Table 4: Diagnostic messages via LED
1) Normal operation: The module is connected to XI/ON,
the 24 V DC auxiliary voltage is connected.
LED Display Operating
mode Meaning Remedy
RUN Green, flashing,
0.5 Hz Start standby
mode Normal operation
1)
, PKZM0
is ON, DILEM is OFF
-
Green Normal
operation Normal operation
1)
, PKZM0
is ON, DILEM is ON
-
OFF PKZM0 is switched off;
PKZM0 trip (performance
module without AGM) Switch the PKZM0
on.
ERROR Red, flashing,
5 Hz Actuation
follows Normal operation
1)
,
contactor does not pick up
Replace the
performance
module.
No actuation Normal operation
1)
,
contactor is welded toge-
ther
Replace the
performance
module.
Red, flashing,
0.5 Hz Actuation
follows Normal operation
1)
, PKZM0
trip (only with performance
modules with AGM)
Check the wiring
of the motor.
Red, flashing,
0.5 Hz, and LED
RUN green, flas-
hing, with 0.5 Hz Ident error, wrong perfor-
mance module plugged Plug a perfor-
mance module of
the correct perfor-
mance class.
For Immediate Delivery call KMParts.com at (866) 595-9616