background image

EE

–3192 Office Chair

 

Customer Service 908-368-1025︱www.modwayfurniture.com

 

 

Page  1  of  7 

 

 

 

 

 

Thank you for purchasing the 

MODWAY OFFICE CHAIR. 

Before you start, here are some helpful advice: 

1.  We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step 

instructions. 

2

Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or 

padded area, in the room that it is intended for. Approximate assembly time: 30 minutes. 

3

Please do not use any tools other than those provided or recommended in these instructions. 

4

Please do not throw away any of the packaging or the instruction until you have checked all the components 

and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe     

and environmentally friendly way. 

5

Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten 

the components from time to time, so please save the tools that have been provided. 

6

Please keep all fitting out of reach of children. 

                                                                                                           

Hardware:

 

A.                                  Bolt M6x35mm        x 6 

B.                                  Bolt M6x20mm        x 7 

C.                                  Bolt M8x20mm        x 3 

D.                                  ScrewM4x14mm    x 2 

E.                                  Flat Washer 15mm x 6 

F.                                  Flat Washer 18mm x 10 

G.                                  Allen Wrench M6        x1 

H                                    Spring Washer        x 3 

I                                      Screwdriver not included x1 

Component:

 

 

 

 

 

 

 

 

 

 

 

 

1  Base    x1

 

2  Cylinder Column    x1     

3    Control Mechanism    x1

 

4    Seat    x1

 

5    Back Frame    x1

 

6    Left Arm    x1     

7    Right Arm    x1             

8    Castor    x5 

9    Back support    x1 

10    Back Cover    x1 

11 Foot Ring    x1 

 

                              7

                              5

                              3

                              2

                              1

                              4

                              9

                              10

                              11

                              6

Summary of Contents for EEI–3192








Reviews: