background image

 

Customer Service 908-368-1025

www.modwayfurniture.com                                                                             

Page 1 of 5 

EEI –2787  

DESK

 

Thank you for purchasing the 

MODWAY DESK

 

Before you start, here is some helpful advice: 

1

.

We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step  

    instructions. 

2

.

Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or    

    padded area, in the room that it is intended for. Approximate assembly time: 45 minutes. 

3

.

Please do not use any tools other than those provided or recommended in these instructions. 

4

.

Please do not throw away any of the packaging or the instruction until you have checked all the components and 

    hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and 
    environmentally friendly way. 

5

.

Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the  

    components from time to time, so please save the tools that have been provided. 

6

.

Please keep all fitting out of reach of children. 

Hardware:

 

A

 

Long Bolt M6x12mm           x16

 

B

 

G

 

Allen Wrench M4                   x1

 

D

 

Components:

 

Short Bolt M4x6mm             x6

 

Long Screw  M4x14mm       x24

 

1

 

2

 

2

 

3

 

4

 

6

 

3

 

5

 

7

 

3

 

C

 

Small Nut                             x6

 

E

 

F

 

Adjustable leveler                 x4

 

Short Screw  M4x12mm       x2

 

Phillips Head Screwdriver  

( Not included)

 

3

 

4

 

6

 

8

 

1

 

Desk Top     x1

 

2

 

Rail                  x2

 

3

 

Leg                x4

 

4

 

Stretcher              x2

 

5

 

Cube Left     x1

 

6

 

Cube Right       x1

 

7

 

Cube Top       x1

 

8

 

Cube Bottom         x1

 

Summary of Contents for EEI –2787






Reviews: