DMX AUDIO PLAYER 01
4
1.
General description
MODUS DMX Audio Player can be used to play music, voice
communicates, sound effects, etc. in MP3 and WAV formats. It
can play up to 255 files stored in 99 catalogues.
The device is equipped with a stereophonic D-class 2x15 W
amplifier that can power lower-ohm speakers or sets with
combined
resistance
no
lower
than
4
ohms.
Trigger connector allows to connect an external triggering
device, e.g. a button, motion detector, reed switch, etc. and
activate the device functions with it.
A built-in relay enhances the controller, allowing to activate \
deactivate external devices with maximal load of 5 A and voltage
of 24 V, synchronically with the played audio file or
independently, using DMX signal.
The device works in three modes:
-
DMX
mode,
where with the use of DMX signal, it is possible to
choose a catalogue, track, control volume, start and stop
playback, control the galvanically isolated relay and trigger an
additional output (EXT. OUT).
-
STANDALONE
mode, where audio files are automatically played
once the power is switched on. It is possible to set the desired
volume and relay state.
-
MANUAL
mode, where audio files are played once TRIGGER
output is activated/shorted, e.g. with an external button or
motion detector. It is possible to set the desired volume, relay
state and playback style.
