Modulex SX-LN131, Mounting Installation Manual

Page: 1 / 2

Conformity ceiling thickness 12.5〜25mm
After wire connection
Height adjustment is possible
(Constructs Separately)
3/8” bolt
Box
wiring hole
Weight 9.4kg
SX-LN131
NEO DOWNLIGHT
The fixture is for indoor use only in general conditions.
Can not be used following conditions (Causes of falling, electrocution and fire)
●Ambient temperature under 0℃ and over 35℃
●High humidity
●Outside
●On the floor
●Insulated inside of ceiling
20cm〜
10cm〜
●Vibrated or shocked areas
●Areas get direct sunlight
●Inclined, uneven surface
●Ceiling which canʼt hold the fixture weight
●On the wall
●Places affected by wind or air-conditioner machine
●Near fire
●Dusty areas, corrosive gas outbreaks areas
Before
installation
Warning
Caution
Please contact if you are not able to judge whether installation
environment is suitable to the places or not.
Insulator
Insulator Insulator
To install the fixture safely《 Read carefully and follow all the instructions in the guide 》
Warning : Failure to install the fixture properly could result in personal injury.
Failure to install the fixture properly could result in property damage.
: Prohibited
: Strict observance
Caution :
Warning
Please follow the fixturesʼ indication or specification for the distance of irradiated area.
(Causes of change in shape, change in color of irradiated objects)
At lighting
fixture
installation
Caution
Make sure the construction will not affect any fire prevention systems such as sprinkler by heat from the fixture.
(Causes for improper operation)
Please follow the fixturesʼ instruction or this guide to install the fixture and lamp. (Causes of falling・electrification・fire)
Make sure to install all the parts of fixtures besides installation and mounting parts will not touch with any
objects both inside and outside of ceiling such as lighting track, etc. (Causes of falling・electrification・fire)
Do not dismount or remodel fixtures. (Cause of electrification・fire・falling・broken fixtures)
Fixture Installing Rail
Fixture (sold separately)
Ballast(sold separately)
Cover maintenance
Adjustable bracket
Surface finish
Channel bar
ballast shall be placed outside
the box from the access hole
The fixture cord shall be put out from the through
hole in the center of the box and put out through access hole.
ballast shall be placed outside the box and close
the maintenance cover
(Constructs Separately)
(Constructs Separately)
Installation Guide Mounting
Installation Guide
Mounting