7
Electrical Connection
1.
The adjustment conditions for this appliance are stated on the
rating label.
2.
Electrical connection of the should only be made to
connections/sockets with an earth system installed in
compliance with local regulations. If there are no
connections/sockets with an earth system in place where the
cooker will be installed, immediately contact a qualified
electrician to install. The MODENA is not responsible for
damages that will arise because of the appliance not be
connected to an earth system.
3.
Your cooker is for use with 220-240V AC or 230 VAC for mono
phase and 230V/400V 3N for 3 phase 50-60 Hz electric
supply. If your supply is different from the specified value,
contact your authorized service agent.
4.
When placing your cooker to its location, ensure that it is at the
counter level. Bring it to the counter level by adjusting the feet
if necessary.
5.
Some models are supplied without a plug-an-lead set. In this
case please use a flexible cable to suitable for connection to
mono phase: H05 VV-F 3 G 2,5 mm
2
, H05 VV-F 3 G 4 mm2 or
for 3 phase: H05 VV-F5 G 1.5 mm
2
.
PART 3: INSTALLATION PROCESS
