13
Installation Conditions
The dimensions of the appliance are given in
picture 3.
The furniture surfaces to be installed and the
installation materials to be used shall resist a
temperature of at least 100 °C.
To prevent the appliance from turning over, the
cabinet to be installed shall be fixed and the
cabinet floor shall be level.
The floor of the cabinet shall be strong enough to
withstand a load of at least 60 kg.
Placing and Securing the Oven
Place the oven to the cabinet with two or more persons. Make sure that the frame
of the oven and the front of the furniture are properly aligned. The supply cord
shall not be left under the oven or be stuck or bent between the oven and the
furniture. Secure the oven to the furniture using the screws supplied in the
appliance. Screws shall be installed by putting them through the plastics attached
on the frame of the appliance as shown in picture 5. The screws shall not be
tightened too much. Otherwise, the screw holes may wear out. Check that the oven
does not move after installation. If the oven has not been installed in accordance
with the installation instructions, there is a risk of overturning during operation.
MODEL
A (mm)
B (mm)
C (mm)
BO 7838
550
560
590
Summary of Contents for BO 7838
Page 1: ...User Manual Book Oven Bravo Series BO 7838 ...
Page 56: ...11 20 ...