10
Before Locating The Fixing Brackets
The unit should be placed on a stable, smooth surface (use the
packaging). Do not apply force on to the controls protruding from the
hob.
Easy Fit kits
There is one easy fit kits package for each hob, include fixing clips and
screws (for ceramic hob there are total 2 pcs clip and 2 pcs screw, for
induction hob there are total 4pcs clip and 4pcs screw). Find the easy
fit kit package first.
A (mm)
B (mm)
C (mm)
D
E
760 mm
50 mm minimal
20 mm minimal
Air Intake
Air exit 5 mm
ATTENTION
•
If the induction cooker is installed with an oven below it,
separator panel must be placed between the bottom of the
stove and the frame below it at a minimum distance of 10 cm.
•
If the induction cooker is installed without oven on the bottom,
the minimum distances to put the separator
pan
•
Electrical cable from both equipments must be installed
separately to avoid short circuit.
Summary of Contents for BI 1625 F
Page 1: ...User Manual Book Built In Induction Hob BI 1625 F ...
Page 34: ...02 21 ...
