Modena BC 1321 L User Manual Book Download Page 4

Page: 4 / 32

Your safety is important to us. Please read below information carefully
before installing or using your Hob.

Electrical Shock Hazard And Cut Hazard

•

Disconnect the appliance from the mains electricity supply before
carrying out any work or maintenance on it.

•

Connection to a good earth wiring system is essential and
mandatory.

•

Alterations to the domestic wiring system must only be made by
MODENA Technician.

•

Failure to follow this advice may result in electrical shock or death.

•

Take care - panel edges are sharp.

•

Failure to use caution could result in injury or cuts.

•

Do not cook on a broken or cracked hob. If the hob surface should
break or crack, switch the appliance off immediately at the mains
power supply (wall switch) and contact MODENA technician.

•

Switch the hob off at the wall before cleaning or maintenance.

•

Failure to follow this advice may result in electrical shock or death.

Important Safety Instructions

•

No combustible material or products should be placed on the
appliance at any time.

•

In order to avoid a hazard, this appliance must be installed according
to these instructions for installation.

•

This appliance is to be properly installed and earthed only by
MODENA Technician. By contact MODENA Customer Service.

PART 1: SAFETY WARNINGS

Summary of Contents for BC 1321 L

































Search results

Summary of Contents for BC 1321 L

Reviews:

Brands by name

Popular brands

Modena BC 1321 L, User Manual Book

Search results

Summary of Contents for BC 1321 L

Reviews:

Brands by name

Popular brands