06.01.22, 11:53
Duo X User Guide - MOD Wiki
https://wiki.moddevices.com/wiki/Duo_X_User_Guide
7/11
width: 163 mm
length: 188 mm
height: 63 mm
From the v1.9 onwards the LEDs have smooth transitions between colours. The LED colours represent the following input levels:
Off: below -40dB
Green fade in: between -40dB and -6dB
Green fully ON, fading in yellow: between -6dB and -1dB
Red: between -1dB and 0dB
Blinking strong red: 0dB (CLIPPING!)
Adjusting Volumes
To adjust the Master output volume, press and hold the right endless knob.
This will turn this knob into the master output volume control.
While pressing, turn the endless knob up and down to adjust your master
output volume.
The MOD Duo X also allows each input and output volume to be individually
adjusted.
Please refer to the Inputs and Outputs Device Settings section in the wiki for
more information on that.
Tuning
The MOD Duo X has a built-in chromatic tuner that can be accessed on the settings of your device. Both inputs can be used as the tuner input, to
select between them short press the right knob.
If you see a question mark on the tuner screen, it means the MOD Duo X is not receiving any input or the input levels are too low.
Please refer to the Tuner section in the Device Settings page for more information.
Playing
LED Audio meters
Detail of the right display showing the Master Volume
