Mocon AMETEK Dansensor Lippke 5000, User Manual

Page: 66 / 136

64 User Guide EN Dansensor
®
Lippke
®
5000
P/N 380419-C
05/2022
Test screen progress bar
The test screen uses a progress bar to offer a better view of the test progression.
The progress bar shows the area of a test definition’s min. and max. settings of either pressure
or time and a small arrow indicates the current pressure or time. Areas that in the test
definition are defined as acceptable values are green and areas that will result in a failed test
are red.
The various progress bars show the following:
The bar

is used for “Leak”, “Creep” and “Bubble” tests and simply shows the pressure build-
up in the package.
The bar

is used for “Burst” tests and shows the pressure build-up in the package. The green
area illustrates the pressure range within which the package is expected to burst.
The bar

is used for “Leak” tests and shows the pressure loss in the package. If arrow reaches
the red area, the leak limit has been exceeded.
The bar

is used for “Creep” tests and simply shows the duration of the actual testing.
The bar

is used for “Creep2Fail” tests and shows the duration of the actual testing. The
green area illustrates the time range within which the package is expected to burst.
;;;
PEDU
;;;
PEDU
PEDU
PEDU
PEDU
VHF
VHF
NJO NJO NBY NBY
;;VHF