Mocon AMETEK Dansensor Lippke 5000, User Manual

Page: 123 / 136

Dansensor
®
Lippke
®
5000 EN User Guide 121
P/N 380419-C
05/2022
Device
The Device screen holds some basic device setup parameters.
Language When selecting a language all text throughout the menus will be
displayed in this language
Use State Mark Select whether or not the State function should be used for test
definitions/workflows.
If function is disabled all test definitions/workflows are available for
users on all access levels.
Sleep After To save energy and reduce noise, you can make the device switch to
a “Sleep” mode when not in use for a period. This will cause e.g. the
fan in the chamber and the sample pump to stop and the display will
be dimmed.
Setting value to 0 will disable the function.
To “wake up” the device, simply tap anywhere on the screen.
Enter Test Result

(Bubble Test)
Select whether you want the option to enter the result of a “Bubble”
test.
Lock Test When enabled, most of a test definition’s parameters are locked from
editing when tests have been performed using the test definition.