background image

Backboard Upper

Metal rod

Highchair Leg

Footboard

Seat board

Tray

Safety strap

Support brace

IMPORTANT!

KEEP FOR FUTURE REFERENCE:

WARNING: Never leave your child unattended in the highchair. Strict

adult supervision is required at all times.

WARNING: Ensure the safety strap is in use at all times to avoid the child

slipping downwards and causing injury. We recommend the use of the 

shoulder and waist harness at all times to avoid injury caused by falls.
WARNING: Do not use the highchair unless components are correctly

fitted and adjusted.
WARNING: Ensure the highchair is positioned away from objects or

structures that can cause injury. Be aware of the risk of open fire and 

other sources of strong heat, such as electric bar fires, gas fires etc, in

the vicinity of the highchair.
WARNING: Ensure both the seat and footrest are locked into positon

and cannot be moved by hand, before placing the child in the highchair.

Do not tighten all screws until all components have been assembled.
The highchair should not be used until the child can sit up unaided.
Do not use the highchair if any part is broken, torn or missing.

Only use the highchair on a flat, even and horizontal floor. 
Do not elevate the highchair on any structure or table.

WARNING: For babies/toddlers under 2 years old, please ensure the 

seat is positioned on the 1st or 2nd level from the top ONLY.

Original Highchair

1

mocka.co.nz | mocka.com.au

Assembly Instructions

Thank you for your purchase. 

Please follow the instructions below for correct assembly.

Summary of Contents for Original Highchair










Reviews: