*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Hardware Supplied
x12
B
A
x17
C
D
G
H
I
x12
x33
x17
x34
x60
12 mm
L + R
L + R
bolt
locking nut
dowel
long screw
small screw
30 mm
F
E
x28
x28
small bolt
small
locking nut
x4
plastic glides
J
W
safety strap
x1
x22
small nail
K
x2
washer
Z
x1
screw
r/washer
screw
x1
Y
wall
anchor
x1
X
Wall Strap
WARNING:
Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may
require different fixing devices from those supplied.
Phillips & Flathead screwdriver and hammer required
Jolt Tallboy
ASSEMBLY INSTRUCTIONS
1
mocka.co.nz | mocka.com.au
Thank you for your purchase.
Please follow the instructions below for correct assembly.
