nut
x20
A
B
C
D
E
F
Phillips & Flathead screwdrivers required
Hardware Supplied
dowel
x10
bolt
x16
bolt
x18
locking
nut x18
bolt
x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING:
Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
x1
washer
Z
wall
screw x1
r/washer
screw
x1
Y
wall
anchor
x1
X
safety
strap x1
Wall Strap
W
Jimmy Change Table
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
