A
B
C
D
E
F
Phillips & Flathead screwdrivers and hammer
Hardware Supplied
dowel
x20
bolt
x28
locking
nut x28
small
screw x8
long
screw x12
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
x4
long screw
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
L + R
slide rail
x4
mocka.co.nz | mocka.com.au
2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100%
before first use.
Jersey Change Table
G
H
12 mm
small
screw x22
